Eaton 9PX 8KVA 3:1 R/T, 6U With Rack Mount

-Rating (VA/Watts): 8000/7200
-Diagnostics: Full system self test at power up
-UPS Bypass: Yes, ships with MBP11K208
-Dimensions (H x W x D): 259 (6U) x 439 x 762 mm
-Weight: 93 kg
-Warranty: 2 years
-Rail Kit Included: 4-post rail kit and tower pedastals included
-Remote Emergency Power off (REPO): ROO/RPO: Rear deck emergency stop connectors (for remote on/off and power off)
-Input Connectors: Hardwired - see manual for terminal block layout
-Input Cord: None; hardwired
-Input Voltage Range: Full load: 176-276V, Derating: 100-276V
-Nominal Input Voltage: 208V default (200/208/220/230/240/250V)
-Input Frequency: 50/60 Hz
-Input Frequency Range: 60 Hz: 50–70 Hz, 50 Hz: 40–60 Hz
-Input Power Factor: >99

-Nominal Output Voltage: 208V default (200/208/220/230/240/250V)
-Output voltage regulation: ±1% steady-state
-Output Voltage THD: <2% for linear loads
-Output Connectors: (3) NEMA L6-30R, Hardwired
-Power Factor: 0.9
-Transfer Time: 0 ms
-Circuit Breaker: (3) 30A for L6-30R
-Approximate Standard Runtime at 7200 load with no EBM: 5 Minutes

-Optional Extended Battery Module: 9PXEBM240RT
-Battery Description: Sealed, lead-acid; maintenance free
-Maximum number of extended battery modules (EBM): Add up to 5 extended battery modules (EBM) with UPS; add up to 12 EBMs with SC240RT supercharger module
-Battery Management: ABM technology; 3-stage charging extends battery service life by 50% and provides advance warning for battery replacement
-Battery Replacement: Hot-swappable extended battery modules (EBMs); no internal batteries in UPS module
-Start On Battery: Cold-start enabled; first cold start is always forbidden

-User Interface: Graphical display. UPS status in a single view.
-LEDs: 4 status-indicating LEDs
-Communication Ports: RS-232 (RJ45) ports; USB port as standard (HID). 6-foot RS-232 and USB cables included
-Communications Card Slots: Network Card-MS included
-Power Management Software: Eaton Intelligent Power Software Suite CD (included)

General
Topology	On-line double conversion with PFC (Power Factor Correction) system
Configuration	Rack/Tower
Part Number	9PX8KiPM and 9PXEBM240
Rating (VA/Watts)	8000/7200
Dimensions (H x W x D, mm)	260 (6U) x 440 x 685
Weight (kg)	84
Warranty	3 years on electronics, 2 years on battery
Electrical Input
Connection	Hardwired - see manual for terminal block layout
Input Voltage Range	176-276V without derating (up to 100–276V with derating)
Nominal Voltage	200/208/220/230/240/250V
Frequency	50/60 Hz autoselection
Frequency Range	40-70 Hz
Short Circuit Current	120 A
THDI	<5%
Electrical Output
Voltages	200/208/220/230/240/250V +/– 1%
Voltage THD	< 2%
Output Receptacles	Hardwired - see manual for terminal block layout
Overload Capacity	102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 900ms
Efficiency (Normal Mode)	Up to 95% in Online mode, 98% in Hi-Efficiency mode
Output Frequency	50/60 Hz autoselect, frequency converter as standard
Load Crest Factor	3:1
Battery
Battery Management	ABM® and Temperature compensated charging method (user selectable), automatic battery test, deep discharge protection, automatic recognition of external battery units.
Extended Battery Capability	EBM (3U)
Communications
User Interface	Multilingual graphical LCD display
Communication Ports	1 USB port, 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 4 dry contacts (DB9), 1 mini terminal block for remote On/Off and 1 for remote power Off, 1 DB15 for parallel operation.
Communication Slot	1 slot for Network-MS card, ModBus-MS or Relay-MS cards
Environmental & Standards
Audible Noise	<48dB
Operating Temperature	0 to 40°C continuous
Safety markings	IEC/EN 62040-1, UL 1778, CSA 22.2
EMC Markings	IEC/EN 62040 -2 , FCC Class A, IEC/EN 62040-3 (Performance), C-Tick
Approvals	CE, CB report (TUV), UL (Power Module)